How to properly store the DMD system?

The DMD system must be stored in facilities under the same conditions as described in the article on transportation.

Keep the DMD system in a dry place. Do not turn over the boxes containing the system. Boxes from the same system may be stacked, but do not stack boxes from different systems together.

If the storage temperature differs from room temperature, wait until the air inside the boxes reaches room temperature before opening them.

• Related Articles

• How to properly assemble the DMD system?

  Use the DMD system assembly manual for all installation and disassembly instructions. The DMD system is designed for stationary installation only, at locations approved by the APSTEC technical team. Assembly must be performed only by trained ...

• How Should the DMD System Be Packaged and Labeled?

  The DMD system must be transported and stored using three specially designed boxes that ensure safe handling. Using any alternative packaging is strictly prohibited, as it may cause damage during transport. When packing the system in accordance, all ...

• What Safety Rules Should You Follow When Using the DMD System?

  Read and keep these instructions. Improper use or failure to follow the safety guidelines described below may result in injury, equipment malfunction, or breakdown. Connect the device only to a power outlet equipped with proper grounding. Make sure ...

• How to Operate the DMD System?

  1. System initialization and Operating Modes The user can perform several actions to operate the DMD system: Power On — Turns on the system from a powered-off state. After switching on, the system automatically enters the Initialization phase. ...

• How to safely transport the DMD system?

  The DMD system can be transported by any means of transport if the following conditions are met: Transport the system only in the manufacturer’s original packaging. The system must be kept in a horizontal position and handled according to all ...