HSR.4B Assembling, Transportation and Storage

HSR.4B Assembling, Transportation and Storage

 Assembly

  • The HSR is designed exclusively for stationary installation at sites approved by the APSTEC technical team.

  • Assembly may only be carried out by APSTEC specialists or an authorized organization.

  • It is strictly prohibited to move the system, change its location, or operate it at sites not approved by APSTEC. In such cases, APSTEC will not be held responsible for the equipment’s performance or operational characteristics.

  • End users are not allowed to open the system casing.

Notes
 For safe operation of the HSR, all the following rules must be strictly observed.

Transportation

  • Transportation is permitted only in the original packaging provided by the manufacturer.

  • The system must be transported strictly in a horizontal position, in accordance with the shipping labels.

  • Transportation is allowed only in closed vehicles.

  • During transportation and installation, avoid shocks, drops, or any mechanical damage to the system.


                            Transportation conditions



Parameter
Value
Air Temperature
+4 up to +40
Relative humidity 
Not more than 80% at 25°C


Storage
  1. The HSR must be stored only in closed facilities that maintain the specified temperature and humidity conditions.
  2. Storage conditions are identical to the transportation conditions specified above.