HSR.4B OPERATING CONDITIONS

HSR.4B OPERATING CONDITIONS

1. The HSR system is designed for indoor use only, in environments with controlled climate conditions. This protects the device from direct sunlight, rain, wind, sand, and dust from outside air. Humidity levels should also be controlled to prevent condensation.

2. Operating conditions:
  1. Ambient temperature from +10°C to +35°C
  1. Relative humidity up to 80% at 25°C
  1. Atmospheric pressure between 630 and 800 mm Hg
 
3. Installation, calibration, and system activation must be carried out only by APSTEC technical support or authorized organizations.

4. It is prohibited to place any stickers, logos, or advertisements on the HSR casing without APSTEC’s permission.


5. Transparent parts of the video sensors must not be covered.


6. Before installation, the organization of people flow through the inspection zone and measures to protect the system from damage and unauthorized access must be coordinated with APSTEC technical support.


    • Related Articles

    • What are the operating conditions of the DMD system?

      Parameter Value Recommended temperature range +3°C to +40°С Maximum temperature range -10°C to +55°С Humidity 5% to 90%, non-condensing Atmospheric pressure 630mmHg to 800mmHg The DMD system is designed to operate reliably even under short-term peak ...

    • HSR.4B GENERAL INFORMATION

      The Human Security Radar (HSR) is an Active Microwave System developed by APSTEC. It is designed for non-contact inspection of people to detect metal and dielectric (non-metallic) objects hidden under clothing or in backpacks. Essential information ...

    • HSR.4B INSTALLATION SITE REQUIREMENTS

      Location: Minimum space: 5.0 m (L) × 4.1 m (W) × 3.0 m (H) Must allow installation of deflectors on HSR pillars No floor or nearby vibrations No direct sunlight on video cameras No large static/moving metal objects within 3 m of the system No foreign ...

    • HSR.4B Assembling, Transportation and Storage

      Assembly The HSR is designed exclusively for stationary installation at sites approved by the APSTEC technical team. Assembly may only be carried out by APSTEC specialists or an authorized organization. It is strictly prohibited to move the system, ...

    • HSR.4B Labelling & Packaging

      Example of label placement on the pillar Device Labelling Each HSR pillar has an identical label containing: Manufacturer trademark “APSTEC” Product name and serial number Power consumption details Pillar number Production date and location Packaging ...