HSS.2A ALARM MONITOR CLIENT- GENERAL OVERVIEW

Alarm Monitor Client (AMC) is software used to receive alarm signals from the HSS system. It can be installed on a PC (Desktop AMC) or a mobile device (Mobile AMC).

Main Functions:

• Displays a photo of the person or object that triggered the alarm.

• Alerts the operator with a sound and/or vibration.

• Allows viewing alarm history on the desktop.

• Mobile AMC displays a photo of the object with sound and/or vibration alert.

Connection:

• A PC connects to the HSS via LAN or Wi-Fi (through a router or the HSS’s internal Wi-Fi module).

• Mobile devices connect only via Wi-Fi.

For more information, see the Get Client Tab in the chapter describing Service Interface.

The HSS connects to mobile devices only via wireless connection.

Additional Information

The Alarm Monitor Client package includes software for collecting information from the HSS and displaying it to the operator.

• The desktop version shows alarm photos and the approximate location of a potentially dangerous object.

• It informs the operator of system errors and allows control over HSS status.

• If multiple HSS systems are installed, AMC gathers and displays data from all systems.

Installation and updating of software is carried out through Apstec support on devices provided by the End User.

In the event of an unintentional power failure of the device due to reasons dependent or independent of the End User, it may be necessary to reconnect auxiliary devices to the HSS Wi-Fi network and restart the Alarm Monitor Client after the device is turned on. After connecting, the last saved data is loaded within a short time.

Related Articles:

• HSS.2A Mobile Alarm Monitor Client – guide for using the mobile version of the alarm monitoring client.

• HSS.2A Alarm Signals and Alerts – details on alarm signals, alert types, and their handling.

• HSS.2A Desktop Alarm Monitor Client – guide for the desktop client version.

  
  

• Related Articles

• HSS.2A MOBILE ALARM MONITOR CLIENT

  To launch the application, tap the Mobile Alarm Monitor Client shortcut on the tablet. Make sure the tablet is connected to the HSS via Wi-Fi. The connection can be made through the HSS’s internal Wi-Fi module or a Wi-Fi router connected to the HSS ...

• HSS.2A DESKTOP ALARM MONITOR CLIENT

  The Desktop Alarm Monitor Client is launched by double-clicking the APSTEC shortcut on the desktop. Shortcut for launching the Desktop Alarm Monitor Client First launch When starting the program for the first time: Enter the server address Enter ...

• HSS.2A GENERAL INFORMATION

  Human Security Scanner (HSS) is a people-screening solution that uses microwave and passive magnetometry technologies to detect threats. It can identify explosives, narcotics, firearms, and metals carried on the body or in backpacks and handbags. ...

• HSS.2A ALARM SIGNALS AND ALERTS

  In radio wave operation mode, an alarm is triggered if an object is identified as potentially dangerous based on the analysis of reflected radio waves. The detected area is highlighted with a red rectangle Example of an alarm in radio wave operation ...

• HSR.4B HSR Client Software Operator’s Guide

  Connecting and Launching the Program After installation, a shortcut for HSR Client appears on the desktop. When starting the program, the operator must enter a username, password, and HSR server address. These credentials are provided by the system ...