HSS.2A ASSEMBLING

HSS.2A ASSEMBLING

  1. The HSS is intended for stationary installation and must be placed at a location approved by the APSTEC technical team.
  1. Installation should be carried out only by trained personnel, either from the APSTEC technical team or an authorised organisation, following the official assembly instructions.
  1. Moving, relocating, or operating the HSS at an unapproved site is not allowed. If the end user does so, APSTEC will not be responsible for the system’s performance or functionality.
  1. The end user is not allowed to open the system casing under any circumstances.

    • Related Articles

    • HSS.2A DIMENSIONS

      External dimensions - 2245 mm х 1341 mm х 580 mm Required minimal space for HSS installation - 1.8 m x 1.5 m Passage width - 1.2 m The Inspection zone of HSS system

    • HSS.2A STORAGE

      The HSS must be stored in indoor facilities that meet the conditions specified in Table. Parameter Value Air temperature -40°C to +55°С Humidity 5% to 90%, non-condensing Keep the HSS in a dry place. Do not turn the boxes over. Do not stack the ...

    • HSS.2A SPECIFICATION

      PARAMETER VALUE Voltage 100 - 240 VAC, 50 - 60 Hz Rated input (AC) power 150 W Peak input (AC) power 250 W Net weight of HSS.2A system 90 kg IP rating IP54 External dimensions (See Fig. 1) 2245 mm х 1341 mm х 580 mm Required minimal space for HSS ...

    • HSS.2A GENERAL INFORMATION

      Human Security Scanner (HSS) is a people-screening solution that uses microwave and passive magnetometry technologies to detect threats. It can identify explosives, narcotics, firearms, and metals carried on the body or in backpacks and handbags. ...

    • HSS.2A TRANSPORTATION

      The HSS can be transported using any type of vehicle, as long as the following conditions are met: The system must be transported only in the original packaging provided by the manufacturer. The system must be kept in a horizontal position, and all ...