HSS.2A OPERATION CONDITIONS
PARAMETER | VALUE |
| Recommended temperature range | +3°C to +40°С |
Maximum temperature range | -10°C to +55°С |
Humidity | 5% to 90%, non-condensing |
Atmospheric pressure | 630mmHg to 800mmHg |
Notes:
- The HSS system can handle high temperatures for short periods. However, constant exposure to extreme heat may reduce the time between required maintenance.
- Do not place stickers, logos, or any materials on the system without APSTEC's approval.
- Never cover the transparent areas of the video cameras.
- Before installation, discuss with APSTEC how people will move through the inspection zone, how to manage the flow, and how to protect the system from unauthorized access or damage.
Only APSTEC specialists or trained staff from an authorized organization can install, calibrate, and start the system.
Related Articles
HSS.2A OPERATOR RESPONSIBILITIES FOR OPERATION
Before starting work with the HSS system, the operator must inspect the equipment and ensure proper operating conditions. Requirements to follow: Ensure the system is connected to the correct power source. Check racks for mechanical damage. Camera ...HSS.2A PRINCIPLE OF OPERATION
The HSS system uses radio waves and cameras to automatically detect hidden threat objects on a person or in their belongings. It creates an image of the person using radio waves. Detects suspicious items and compares them to known threats (like ...HSS.2A STATUS CHANGE AND OPERATOR ACTIONS
The HSS does not make decisions. It alerts the operator to possible threats. All further actions must follow the organization's internal security procedures. Message Status description Operator’s Action Connected Green. System is operating normally ...HSR.4B OPERATING CONDITIONS
1. The HSR system is designed for indoor use only, in environments with controlled climate conditions. This protects the device from direct sunlight, rain, wind, sand, and dust from outside air. Humidity levels should also be controlled to prevent ...HSS.2A STORAGE
The HSS must be stored in indoor facilities that meet the conditions specified in Table. Parameter Value Air temperature -40°C to +55°С Humidity 5% to 90%, non-condensing Keep the HSS in a dry place. Do not turn the boxes over. Do not stack the ...