HSS.2A STORAGE

HSS.2A STORAGE

The HSS must be stored in indoor facilities that meet the conditions specified in Table.


Parameter
Value
Air temperature
-40°C to +55°С 
Humidity
5% to 90%, non-condensing 

Notes
Keep the HSS in a dry place. Do not turn the boxes over. Do not stack the boxes.
Notes
If the storage or transport temperature was different from room temperature, wait until the air inside the boxes reaches room temperature before opening them.

    • Related Articles

    • HSS.2A SERVICE INTERFACE

      Service interface This section describes how to use the different tabs in the service interface. Only users with administrator rights have access. The layout and options may vary depending on the version of the system. The interface is used to ...

    • HSR.4B Assembling, Transportation and Storage

      Assembly The HSR is designed exclusively for stationary installation at sites approved by the APSTEC technical team. Assembly may only be carried out by APSTEC specialists or an authorized organization. It is strictly prohibited to move the system, ...

    • HSS.2A DIMENSIONS

      External dimensions - 2245 mm х 1341 mm х 580 mm Required minimal space for HSS installation - 1.8 m x 1.5 m Passage width - 1.2 m The Inspection zone of HSS system

    • HSS.2A GENERAL INFORMATION

      Human Security Scanner (HSS) is a people-screening solution that uses microwave and passive magnetometry technologies to detect threats. It can identify explosives, narcotics, firearms, and metals carried on the body or in backpacks and handbags. ...

    • HSS.2A SPECIFICATION

      PARAMETER VALUE Voltage 100 - 240 VAC, 50 - 60 Hz Rated input (AC) power 150 W Peak input (AC) power 250 W Net weight of HSS.2A system 90 kg IP rating IP54 External dimensions (See Fig. 1) 2245 mm х 1341 mm х 580 mm Required minimal space for HSS ...