HSS.2A TRANSPORTATION

HSS.2A TRANSPORTATION

The HSS can be transported using any type of vehicle, as long as the following conditions are met:

  • The system must be transported only in the original packaging provided by the manufacturer.

  • The system must be kept in a horizontal position, and all shipping labels must be followed carefully.

  • Transport must be carried out in closed vehicles. Transportation conditions are listed in Table 5.

  • During transportation and installation, handle the HSS with care. Avoid any strong impacts or mechanical damage to any part of the system.


Parameter
Value
Air temperature
-40°C to +55°С
Humidity
5% to 90%, non-condensing


    • Related Articles

    • HSS.2A DIMENSIONS

      External dimensions - 2245 mm х 1341 mm х 580 mm Required minimal space for HSS installation - 1.8 m x 1.5 m Passage width - 1.2 m The Inspection zone of HSS system

    • HSS.2A STORAGE

      The HSS must be stored in indoor facilities that meet the conditions specified in Table. Parameter Value Air temperature -40°C to +55°С Humidity 5% to 90%, non-condensing Keep the HSS in a dry place. Do not turn the boxes over. Do not stack the ...

    • HSS.2A SPECIFICATION

      PARAMETER VALUE Voltage 100 - 240 VAC, 50 - 60 Hz Rated input (AC) power 150 W Peak input (AC) power 250 W Net weight of HSS.2A system 90 kg IP rating IP54 External dimensions (See Fig. 1) 2245 mm х 1341 mm х 580 mm Required minimal space for HSS ...

    • HSS.2A GENERAL INFORMATION

      Human Security Scanner (HSS) is a people-screening solution that uses microwave and passive magnetometry technologies to detect threats. It can identify explosives, narcotics, firearms, and metals carried on the body or in backpacks and handbags. ...

    • HSS.2A ASSEMBLING

      The HSS is intended for stationary installation and must be placed at a location approved by the APSTEC technical team. Installation should be carried out only by trained personnel, either from the APSTEC technical team or an authorised organisation, ...