What are the operator’s duties for the DMD system?
Failure to follow these instructions may affect the system’s performance and reliability.
The operator must:
Ensure the safety of the DMD system and all connected equipment.
Prevent any physical impact, tilting, or shifting of the system.
Check the inspection area — it must be free of interference or foreign objects.
Organize the flow of people according to Apstec’s recommendations.
Verify that all barriers and guide tapes are correctly positioned and not moved.
Continuously monitor the system’s status and promptly report any errors to Apstec Support.
Check equipment condition — battery levels, Wi-Fi strength, and system connection (“connected” status).
Reboot the DMD system and operator’s computer at least once a week.
Do not place any stickers, labels, or advertisements on the system.
Respond appropriately to system alerts and signals.
The DMD system automatically notifies the operator of detected threats or system status changes.
In case of suspicious activity, the operator must act according to the organization’s internal safety procedures.
In case of suspicious activity, the operator must act according to the organization’s internal safety procedures.
Related Articles
What should the operator do when the DMD system status changes?
Message Status Operator’s Action Connected (Green) System operating normally No action required. Disconnected (Grey) Connection error №1 Restart the DMD Alarm Monitor Client. Check the connection. If the issue persists — power the system OFF, then ON ...How to Operate the DMD System?
1. System initialization and Operating Modes The user can perform several actions to operate the DMD system: Power On — Turns on the system from a powered-off state. After switching on, the system automatically enters the Initialization phase. ...HSR.4B HSR Client Software Operator’s Guide
Connecting and Launching the Program After installation, a shortcut for HSR Client appears on the desktop. When starting the program, the operator must enter a username, password, and HSR server address. These credentials are provided by the system ...How to Prepare the Installation Site for the DMD System?
To ensure stable and efficient operation of the DMD system, it is essential to choose the right installation site. Below are the key requirements. Installation Area Minimum space: 2.58 m (length) × 1.5 m (width) × 2.5 m (height). Surface: flat, ...How to safely transport the DMD system?
The DMD system can be transported by any means of transport if the following conditions are met: Transport the system only in the manufacturer’s original packaging. The system must be kept in a horizontal position and handled according to all ...