What is the intended use of the DMD system?
The DMD system is designed to detect metal objects that people may carry. Its main purpose is to identify weapons and ensure safety in public spaces.
The DMD system can be used in the following locations:
- Transport infrastructure (airports, bus stations, railway stations, metro, etc.);
- Public events (sports events, concerts, forums, meetings, etc.);
Building entrances (hotels, police stations, government buildings, religious sites, shopping malls, business centres, skyscrapers, etc.);
Industrial facilities (factories, power plants, and similar sites)
Main features:
Automatic detection;
Real-time alerts;
Reduced need for manual inspection;
Low false alarm rate and high detection accuracy;
APSTEC Systems accepts no responsibility for the use of the equipment for purposes other than those described above.
When used according to the instructions, the DMD system poses no known health risks to pregnant women, individuals with pacemakers, or anyone else walking through the detector.
Related Articles
How to properly assemble the DMD system?
Use the DMD system assembly manual for all installation and disassembly instructions. The DMD system is designed for stationary installation only, at locations approved by the APSTEC technical team. Assembly must be performed only by trained ...How to Operate the DMD System?
1. System initialization and Operating Modes The user can perform several actions to operate the DMD system: Power On — Turns on the system from a powered-off state. After switching on, the system automatically enters the Initialization phase. ...How Should the DMD System Be Repaired, Recycled, and Maintained?
The DMD system must be repaired only by authorized Apstec Systems personnel. Any unauthorized repair attempts may cause damage and void the warranty. When the system reaches the end of its service life, it must be recycled in compliance with ...What Are the Main Technical Characteristics of the DMD System?
Parameter Value Voltage 100–240 VAC, 50–60 Hz Rated Maximum Input (AC) Power 120 W Net Weight 60 kg IP Rating 4x External Dimensions 2246 mm × 1341 mm × 580 mm Minimum Installation Space 2580 mm × 1500 mm Passage Width 1.2 m Operating Hours ...How to properly store the DMD system?
The DMD system must be stored in facilities under the same conditions as described in the article on transportation. Keep the DMD system in a dry place. Do not turn over the boxes containing the system. Boxes from the same system may be stacked, but ...