Read and keep these instructions. Improper use or failure to follow the safety guidelines described below may result in injury, equipment malfunction, or breakdown.
Electrical Grounding: Connect the device only to a power outlet equipped with proper grounding.
Proper Grounding Requirement: Make sure the Apstec Merlin system is correctly grounded. Never operate it without grounding.
Power Cord: Do not remove the grounding pin from the power cord.
Assembly Check: Ensure the device is fully assembled before connecting it to power and turning it on.
RCD Protection: For extra protection, it is recommended to install a residual current safety switch (RCD) rated at 30mA or less. Consult a qualified electrician if necessary.
Specified Usage: Using the device in ways not specified by the manufacturer may reduce its safety protection.
Assembly Instructions: Follow the provided assembly instructions precisely during installation or dismantling.
Qualified Installation: Installation must be carried out only by qualified personnel.
Operator Training: Operate the system only if you are properly trained and familiar with all relevant operating, service, and safety procedures.
Authorized Maintenance: Only authorised service personnel may perform maintenance. Ensure that no unauthorised individuals are present during servicing or repair.
Self-Repair Restriction: Do not attempt to repair the device yourself. Contact technical support using the provided contact details for assistance.
Disconnecting Power: Always disconnect the system from the power supply before cleaning, moving, or servicing it.
Inspection Before Powering On: Before powering on the device, inspect the outer casing. If you notice any damage, do not turn on the system.
Damage During Operation: If damage occurs during operation, immediately turn off and unplug the device. The casing’s integrity is essential for maintaining dust and moisture protection.
Placement Surface: Do not place the device on an inclined or uneven surface.
Cleaning Guidelines: Clean the equipment only with a damp cloth. Do not use chemicals or liquid detergents.