What Should You Know About the DMD System?
DMD is a walk-through metal detector developed by APSTEC. It is designed for stand-off screening of pedestrian traffic to detect metal objects concealed under clothing or in personal belongings, helping to identify potential threats before entry into secured areas.
The DMD system is a stand-alone component of the HSS Falcon Plus complex. The information below describes its purpose, structure, key components, technical specifications, operating conditions, and an overview of the DMD Client software.
Important Warnings
The system may only be operated by personnel who have completed APSTEC training and are fully familiar with the relevant documentation.
All repair and maintenance work must be carried out exclusively by APSTEC representatives, either on-site or at APSTEC’s service facilities.
Assembly and disassembly of the device must strictly follow the official installation instructions.
Before using the system, make sure to review all safety recommendations and warnings.
Related Articles
How to properly store the DMD system?
The DMD system must be stored in facilities under the same conditions as described in the article on transportation. Keep the DMD system in a dry place. Do not turn over the boxes containing the system. Boxes from the same system may be stacked, but ...How to properly assemble the DMD system?
Use the DMD system assembly manual for all installation and disassembly instructions. The DMD system is designed for stationary installation only, at locations approved by the APSTEC technical team. Assembly must be performed only by trained ...How to Operate the DMD System?
1. System initialization and Operating Modes The user can perform several actions to operate the DMD system: Power On — Turns on the system from a powered-off state. After switching on, the system automatically enters the Initialization phase. ...How to safely transport the DMD system?
The DMD system can be transported by any means of transport if the following conditions are met: Transport the system only in the manufacturer’s original packaging. The system must be kept in a horizontal position and handled according to all ...How to Switch Off the DMD System Correctly?
The DMD system should be switched off in the following way: