HSR.4B INSTALLATION SITE REQUIREMENTS

HSR.4B INSTALLATION SITE REQUIREMENTS

Location:

  • Minimum space: 5.0 m (L) × 4.1 m (W) × 3.0 m (H)

  • Must allow installation of deflectors on HSR pillars

  • No floor or nearby vibrations

  • No direct sunlight on video cameras

  • No large static/moving metal objects within 3 m of the system

  • No foreign objects in the inspection zone

Notes
Installation must be approved by APSTEC specialists.

Power Supply:

  • 220–240 V, 50 Hz, 1.3 kW. Socket should be near one of the HSR pillars (CEE 7/7, type F/E grounded).

Operator’s PC Location:

  • Power socket with Ethernet (Internet)

  • Power socket: 180–240 V, 50 Hz

Network:

  • Connection between HSR and PC via:
    a) Direct Ethernet cable
    b) Local Ethernet network with fixed IP for HSR

  • Minimum speed: 100 Mbit/s

Remote Access:

  • Internet required for remote monitoring and support (via encrypted channel).

  • If Internet access is unavailable, consult APSTEC support.


    • Related Articles

    • HSS.2A POSSIBLE INSTALLATION SITES AND REQUIREMENTS

      Suitable installation sites The HSS system is designed for fast and safe inspection of people in high-traffic areas. It can be installed in: Transport hubs such as airports, train and bus stations, metro stations Public events including concerts, ...

    • How to Prepare the Installation Site for the DMD System?

      To ensure stable and efficient operation of the DMD system, it is essential to choose the right installation site. Below are the key requirements. Installation Area Minimum space: 2.58 m (length) × 1.5 m (width) × 2.5 m (height). Surface: flat, ...

    • POTENTIAL INSTALLATION SITES FOR THE HSR.4B

      The HSR system is designed to monitor and inspect individuals in areas with high foot traffic. It can be installed in the following locations: transport facilities such as airports, bus and railway stations, metro stations public events including ...

    • HSR.4B GENERAL INFORMATION

      The Human Security Radar (HSR) is an Active Microwave System developed by APSTEC. It is designed for non-contact inspection of people to detect metal and dielectric (non-metallic) objects hidden under clothing or in backpacks. Essential information ...

    • HSR.4B OPERATING CONDITIONS

      1. The HSR system is designed for indoor use only, in environments with controlled climate conditions. This protects the device from direct sunlight, rain, wind, sand, and dust from outside air. Humidity levels should also be controlled to prevent ...