In which countries must additional steps be taken before using the DMD system?

In which countries must additional steps be taken before using the DMD system?



Before operating the DMD system in the listed countries, you must inform the APSTEC team. In some cases, national frequency authorities may require notification or special authorization.

If a regulator needs additional information not supplied with the device, APSTEC will provide it upon request.

Since frequency regulations may change, contact APSTEC before delivering or installing the DMD system in any EU country to confirm compliance with national requirements and coordinate with local authorities if needed.

Notes
APSTEC Systems is not liable if the device is used in the listed countries without proper notifications or regulatory approvals. The user is responsible for ensuring the system configuration complies with local frequency regulations.

    • Related Articles

    • What Safety Rules Should You Follow When Using the DMD System?

      Read and keep these instructions. Improper use or failure to follow the safety guidelines described below may result in injury, equipment malfunction, or breakdown. Connect the device only to a power outlet equipped with proper grounding. Make sure ...

    • How Should the DMD System Be Packaged and Labeled?

      The DMD system must be transported and stored using three specially designed boxes that ensure safe handling. Using any alternative packaging is strictly prohibited, as it may cause damage during transport. When packing the system in accordance, all ...

    • What Is the Inspection Zone of the DMD System?

      The inspection zone is the area a person walks through during the DMD system scan. Once the person leaves this zone, the inspection is complete. The DMD system collects data about the person from the moment they enter until they exit the zone. The ...

    • What Should You Know About the DMD System?

      DMD is a walk-through metal detector developed by APSTEC. It is designed for stand-off screening of pedestrian traffic to detect metal objects concealed under clothing or in personal belongings, helping to identify potential threats before entry into ...

    • How to properly assemble the DMD system?

      Use the DMD system assembly manual for all installation and disassembly instructions. The DMD system is designed for stationary installation only, at locations approved by the APSTEC technical team. Assembly must be performed only by trained ...