HSR.4B COMPONENTS

Component	Quality
Pillar # 1, assembled with a decorative buffer bar	1 pc
Pillar # 2, assembled with a decorative buffer bar	1 pc
Cable duct arch with connection cables and central support	1 set
Packaging	1 set
Calibration and tuning kit	1 set
Desktop computer and/or tablet	1 pc
Operational documentation	1 set

The two HSR pillars are connected by cables laid inside a suspended cable duct at a height of 2.5 meters. The cable duct is a required part of the system.

HSR with a cable duct arch in place

• Related Articles

• HSR.4B GENERAL INFORMATION

  The Human Security Radar (HSR) is an Active Microwave System developed by APSTEC. It is designed for non-contact inspection of people to detect metal and dielectric (non-metallic) objects hidden under clothing or in backpacks. Essential information ...

• HSR.4B INSTALLATION SITE REQUIREMENTS

  Location: Minimum space: 5.0 m (L) × 4.1 m (W) × 3.0 m (H) Must allow installation of deflectors on HSR pillars No floor or nearby vibrations No direct sunlight on video cameras No large static/moving metal objects within 3 m of the system No foreign ...

• HSR.4B Labelling & Packaging

  Example of label placement on the pillar Device Labelling Each HSR pillar has an identical label containing: Manufacturer trademark “APSTEC” Product name and serial number Power consumption details Pillar number Production date and location Packaging ...

• HSR.4B PURPOSE

  HSR is designed for automatic, contactless inspection of people to detect metal and non-metal objects hidden under clothing or in backpacks. It analyzes these objects' physical properties to identify potential threats, including various types of ...

• HSR.4B OPERATING CONDITIONS

  1. The HSR system is designed for indoor use only, in environments with controlled climate conditions. This protects the device from direct sunlight, rain, wind, sand, and dust from outside air. Humidity levels should also be controlled to prevent ...