How to Switch Off the DMD System Correctly?

The DMD system should be switched off in the following way:

• Related Articles

• What Safety Rules Should You Follow When Using the DMD System?

  Read and keep these instructions. Improper use or failure to follow the safety guidelines described below may result in injury, equipment malfunction, or breakdown. Connect the device only to a power outlet equipped with proper grounding. Make sure ...

• How to Operate the DMD System?

  1. System initialization and Operating Modes The user can perform several actions to operate the DMD system: Power On — Turns on the system from a powered-off state. After switching on, the system automatically enters the Initialization phase. ...

• What are the operator’s duties for the DMD system?

  Failure to follow these instructions may affect the system’s performance and reliability. The operator must: Ensure the safety of the DMD system and all connected equipment. Prevent any physical impact, tilting, or shifting of the system. Check the ...

• What should the operator do when the DMD system status changes?

  Message Status Operator’s Action Connected (Green) System operating normally No action required. Disconnected (Grey) Connection error №1 Restart the DMD Alarm Monitor Client. Check the connection. If the issue persists — power the system OFF, then ON ...

• How to properly store the DMD system?

  The DMD system must be stored in facilities under the same conditions as described in the article on transportation. Keep the DMD system in a dry place. Do not turn over the boxes containing the system. Boxes from the same system may be stacked, but ...